BACKlight
SPECIAL FEATURES
Module on Circuit Board
High light power by using OSRAM Power TOPLED
Low heat production
Low profile (< 5 mm) for flat set and fittings
flexible 3D-assembly because of Cable connection
Separable after arbitrary amount of Boards
Module is in accordance to IP22 protected against drip water
Homogenous light distribution already as of 2.5 cm installation depth
Simplified operation by OPTOTRONIC
Available in the colors: red, orange, yellow , green, blue, white
Mounting holes in the boards allows easy installation with seals/screws
Row and parallel wiring of Module chains are possible.
COINlight
SPECIAL FEATURES
High light power by using OSRAM Power TOPLED
Various Modules with 8, 9 or 12 LED, irradiation angle 120° per LED
Low profile (< 10 mm) makes flat installation possible
Simplified operation by OPTOTRONIC
Available in the colors: red, yellow, green, blue, white
Connection possibility to LED Connect System (BJB) with solderless lug at the underside
EFFECTlight
SPECIAL FEATURES
Module with touched optic
High light power by using OSRAM Power TOPLED with Lense
Extreme small emit angle of approx 40°
Connection of max. 14 modules are possible
Low heat production
Easy handling with LED Connect System (BJB)
Simplified operation by OPTOTRONIC
Available in the colors: red, yellow, green, blue
LINEARlight
SPECIAL FEATURES
Module on Circuit Board
High light power by using OSRAM Power TOPLED
Low heat production
Low profile (< 5 mm) for flat set and fitting
Separable into the smallest unit (56 x 10 mm) without function loose at the remaining boards
Easy handling with LED Connect System (BJB)
Simplified operation by OPTOTRONIC
Row and parallel wiring of Module chains are possible.
Available in the Colors: red, yellow, green, blue, white
Extendable by connectors up to 2m, colors can be combined
LINEARlight FLEX
SPECIAL FEATURES
Modules on flexible Circuit Boards
High light power by using OSRAM Power TOPLED or OSRAM SIDELED
Optional with light leaving upwards (Power TOPLED or at the side (SIDELED)
Connection possibility to LED Connect System (BJB) by soldering
Low heat production
Low profile (PowerTOPLED< 2,5 mm; HyperSIDELED< 5 mm) for flat set and fitting
Separable into the smallest unit without function losses at the other boards
Simplified operation by OPTOTRONIC
Flexible 3D-Mounting possible
Available in the colors: red, yellow , green, blue, white
Adhesive tape on the backside for simplified mounting
MARKERlight
SPECIAL FEATURES
Module with light pipe in different shapes
High light power by using OSRAM Hyper SIDELED
Homogeneous illuminated area
Low heat production
Extreme low profile (< 7 mm), suitable for flat set and fitting
Dual color modules available
easy handling by LED Connect System (BJB)
Simplified operation by OPTOTRONIC
Available in the colors: red, yellow, green, blue, white
